VOLVO
ECM-P019500 - Engine Oil Temperature Sensor Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The control module (ECM) compares the engine oil temperature with the coolant temperature. If the two differ too much, this is interpreted as a fault in the oil temperature sensor and the code is set. The fault normally gives no noticeable symptoms for the driver.
Mulige årsaker
- Contact resistance or oxidation in the connectors to the oil temperature sensor
- Open circuit in the signal wire
- Damaged oil temperature sensor
Hva du kan gjøre
- 1Read and clear the code, then see whether it returns after a while of driving
- 2Check that the fuses are intact
- 3Check the connector at the oil temperature sensor for looseness, oxidation and contact resistance
- 4Use a multimeter to check that the signal wire to the sensor has no break
- 5If you have a diagnostic tool: read the engine oil temperature and the coolant temperature in live data at the same time and compare them
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.