VOLVO
ECM-P019622 - Engine Oil Temperature Sensor "A" Range/Performance. General Signal Failures. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
Hva betyr feilkoden?
The control module (ECM) compares the oil temperature with the air temperature from the mass air flow sensor, the coolant temperature and the outside temperature. The code is set when the difference is too large and the signal from the sensor is too high.
Mulige årsaker
- Signal wire shorted to voltage
- Damaged sensor for engine oil pressure and oil temperature
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read and clear the code, then start the engine to see whether it returns
- 3Check the combined oil pressure and oil temperature sensor connector for damage and oxidation
- 4Use a multimeter to check that the signal wire is not shorted to voltage
- 5If you have a diagnostic tool: read the oil temperature in live data and see whether it is high compared with the coolant temperature when the engine is warm
- 6If the fault remains, a workshop should check the sensor and its wiring
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.