VOLVO
ECM-P019700 - Engine Oil Temperature Sensor Circuit Low Input. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The control module (ECM) keeps watch on the engine oil temperature through the oil temperature sensor. The code is set when the signal from the sensor is faulty and at a level that is too low for the control module.
Mulige årsaker
- Contact resistance or oxidation in the connections
- Signal wire shorted to earth
- Open circuit in the earth wire
- Open circuit in the supply wire to the sensor
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read and clear the code, then see whether it returns after a while of driving
- 3Check the oil temperature sensor connector for contact resistance, oxidation and damage
- 4Use a multimeter to check that the earth and supply wires to the sensor have no break, and that the signal wire is not shorted to earth
- 5If the fault remains, a workshop with diagnostic equipment should check the sensor and its wiring
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.