VOLVO
ECM-P019B00 - O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 3. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS80 (2007–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The control module (ECM) actively switches between rich and lean fuel-air mixture and checks how well the rear lambda sensor on bank 1 keeps up with the changes. The code is set when the sensor reacts too slowly during the switch from lean to rich. The fault shows up as a warning lamp and a message in the display.
Mulige årsaker
- Contact resistance or oxidation in the connections
- Damaged rear lambda sensor
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read and clear the code, then drive the car for a while on the road to see whether it returns
- 3Check the connector at the rear lambda sensor for contact resistance and oxidation
- 4If you have a diagnostic tool: read the rear lambda sensor signal in live data and see whether it switches rich and lean when you lift off
- 5If the fault remains, a workshop with diagnostic equipment should check the connections and the rear lambda sensor
Symptomer du kan merke2
- The Check engine lamp lights up or behaves abnormally
- Message in the display together with a warning symbol
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.