VOLVO
ECM-P01A61F - Alternative Fuel Rail Pressure Sensor Circuit High. General Electrical Failures. Circuit intermittent
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The control module (ECM) compares the signal levels from the four pressure sensors in the injectors with a highest permitted value. The code is set when any signal goes above that value. The fault is intermittent and does not occur all the time, so it is not always visible.
Mulige årsaker
- Looseness or oxidation in the connections
- Faulty pressure sensor in one of the injectors
Hva du kan gjøre
- 1Check the injector connectors for looseness and oxidation
- 2Clear the code and start the engine to see whether it returns
- 3If you have a diagnostic tool: compare the pressure from each injector in live data and see whether any one reads clearly high compared with the others
- 4If the fault remains, a workshop with diagnostic equipment should check the pressure sensors in the injectors
Symptomer du kan merke2
- Uneven idle
- The engine may stall, both at idle and while driving
Hva feilen kan påvirke1
- The value from pressure sensor 1 is used instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.