VOLVO
ECM-P01B600 - Alternative Fuel Rail Temperature Sensor Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The control module (ECM) receives the fuel temperature from the injectors over LIN communication and compares it with calibrated limits. The code is set when the temperature from the injector on cylinder 3 falls below the lowest permitted value, and the control module then uses the temperature from one of the other injectors instead.
Mulige årsaker
- Looseness or oxidation in the connections
- Damaged injector on cylinder 3
Hva du kan gjøre
- 1If there are codes for missing or faulty communication with the injectors, fix those first, as this code is then a follow-on fault
- 2Check the injector connectors, especially on cylinder 3, for looseness and oxidation
- 3If you have a diagnostic tool: read the temperature from each injector in live data and see whether cylinder 3 is low compared with the others
- 4If no fault is found in these checks, the injector on cylinder 3 may need to be replaced, which is a workshop job
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The temperature from one of the other injectors is used instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.