VOLVO
ECM-P01B700 - Alternative Fuel Rail Temperature Sensor Circuit High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The control module (ECM) checks the temperature signals from the injectors against calibrated limits. The code is set when the temperature from the injector on cylinder 3 rises above the highest permitted value, and the control module then uses the temperature from one of the other injectors.
Mulige årsaker
- Poor connection with looseness or oxidation
- Damaged injector on cylinder 3
Hva du kan gjøre
- 1If there are other codes for missing or faulty communication with the injectors, this code is a follow-on fault, so those should be fixed first
- 2Check the injector connectors, especially on cylinder 3, that they are secure and free from oxidation
- 3If you have a diagnostic tool: read the temperature from each injector in live data and see whether cylinder 3 reads high compared with the others
- 4If no fault is found in these checks, the injector on cylinder 3 may need to be replaced, which a workshop does
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The temperature from one of the other injectors is used instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.