VOLVO
ECM-P01C200 - Fuel Rail Pressure Sensor Circuit Intermittent/Erratic (Bank 2). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The control module (ECM) compares the signal levels from the pressure sensors in the injectors on cylinders 1 and 4 with both the highest and the lowest permitted values. The code is set when the signal level for either of these two falls outside the limits. The signal is erratic.
Mulige årsaker
- Looseness or oxidation in the connections
- Faulty pressure sensor in the injector on cylinder 1
- Faulty pressure sensor in the injector on cylinder 4
Hva du kan gjøre
- 1Read and clear the code, then start the engine to see whether it returns
- 2Check the connectors to the injectors on cylinders 1 and 4 for looseness and oxidation
- 3If you have a diagnostic tool: compare the pressure from the injectors on cylinders 1 and 4 with the others in live data and see whether either differs
- 4If the fault remains, a workshop with diagnostic equipment should check the pressure sensors in the injectors on cylinders 1 and 4
Symptomer du kan merke2
- The engine may stall at idle
- The engine may stall while driving
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.