VOLVO
ECM-P020000 - Injector Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The control module (ECM) supplies the injectors with a voltage well above the battery voltage and checks how quickly the piezo injectors discharge. The code is set when the discharge time is unreasonable.
Mulige årsaker
- The injector return line is damaged or blocked
- Loose connection, or contact resistance and oxidation in the connections
- Open circuit in the signal wire
- Signal wire shorted to voltage
- Signal wire shorted to earth
- Damaged injector
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read and clear the code, then start the engine to see whether it returns
- 3Check the injector connectors for looseness and oxidation
- 4Use a multimeter to check that the wires to the injectors have no break and are not shorted to earth or voltage
- 5If the fault remains, a workshop with diagnostic equipment should check the injectors and the return line
Symptomer du kan merke2
- Message in the display together with a warning symbol
- Poor performance and lack of power
Hva feilen kan påvirke1
- Engine output and speed may be limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.