VOLVO
ECM-P020068 - Injector Circuit. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
This code is an event-controlled information code and does not indicate a fault in the control module. It is set when one or more injectors are switched off, which can be done during fault finding. The code does not need to be cleared; it disappears by itself when the conditions no longer apply.
Mulige årsaker
- One or more injectors are switched off, for example during fault finding with vehicle communication
Hva du kan gjøre
- 1There is no real fault finding procedure for this code, as it is an information code
- 2If you have switched off an injector with a diagnostic tool, switch it on again and check that the code disappears
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.