VOLVO
ECM-P020100 - Cylinder 1 Injector Circuit / Open. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (43)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Alle motorer unntatt: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4204T5
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4204T5
- Volvo S80 (2007–)2007–2009
- Volvo S80 (2007–)2010Alle motorer unntatt: B4204T6
- Volvo S80 (2007–)2011Alle motorer unntatt: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2013Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7, D4204T5
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4204T5
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3
- Volvo V40 (2013–)2014Alle motorer unntatt: B4164T, B4164T3, B4164T4
- Volvo V40 (2013–)2015Alle motorer unntatt: B4164T, B4164T3, B4164T4, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Alle motorer unntatt: B4164T
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4204T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: B6304T4, D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012–2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4204T5
- Volvo V60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009
- Volvo V70 (2008–)2010Alle motorer unntatt: B4204T6
- Volvo V70 (2008–)2011Alle motorer unntatt: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2013Alle motorer unntatt: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T7, D4204T5
- Volvo V70 (2008–)2015Alle motorer unntatt: B4164T, B4164T2, D4204T5
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Alle motorer unntatt: B4204T6
- Volvo XC60 (2009–)2011–2012Alle motorer unntatt: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7
- Volvo XC60 (2009–)2014–2015Alle motorer unntatt: B4204T7, D4204T5
- Volvo XC70 (2008–)2008–2013
- Volvo XC70 (2008–)2014–2015Alle motorer unntatt: D4204T5
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Kun motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle motorer unntatt: B5254T9
Hva betyr feilkoden?
The control module (ECM) controls when and for how long the injector on cylinder 1 opens and closes. The code is set when the control signal to the injector is out of range or absent, and cylinder 1 may then get too little or no injection.
Mulige årsaker
- Contact resistance and oxidation in the injector connector
- Signal wire shorted to voltage
- Open circuit in the signal wire
- Open circuit in the voltage supply to the injector
- Signal wire shorted to earth
- Damaged injector
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read and clear the code, then start the engine to see whether it returns
- 3Check the connector to the injector on cylinder 1 for contact resistance and oxidation
- 4Use a multimeter to check that the wires to the injector on cylinder 1 have no break and are not shorted to earth or voltage
- 5If the fault remains, a workshop with diagnostic equipment should check the injector on cylinder 1 and its wiring
Symptomer du kan merke5
- The environmental warning lamp lights up
- The engine does not run on all cylinders
- The engine fails to start although cranking is normal
- Poor performance and lack of power
- The engine hesitates or runs unevenly at idle
Hva feilen kan påvirke3
- Lambda control is blocked
- Injection on cylinder 1 stops
- Engine output and speed may be limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.
Vanlige kombinasjoner
ECM-P020100
ECM-P020200
ECM-P020300
ECM-P020100, ECM-P020200, ECM-P020300 Volvo VEA – i-ART Piezo Spridare Cyl 1–3 Teknisk Veiledning
VOLVO • 182 analyser
ECM-P020100
ECM-P020200
ECM-P020500
ECM-P020100, ECM-P020200, ECM-P020500 Volvo – Piezo Spridarbank 1/2 Feilsøkingsguide
VOLVO • 90 analyser