VOLVO
ECM-P020313 - Cylinder 3 Injector Circuit / Open. General Electrical Failures. Circuit open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The fault concerns the injector on cylinder 3, which receives no signal from the control module. The circuit is checked from the earth side, and the code is set when the signal is missing.
Mulige årsaker
- Contact resistance at the connections to the injector
- Open circuit in the signal wire
- Open circuit in the voltage supply
- Damaged injector
Hva du kan gjøre
- 1Read and clear the code, then start the engine to see whether it returns
- 2Check that the fuses are intact
- 3Use a multimeter to check that the wire to the injector on cylinder 3 has no break
- 4Check the connector at the injector on cylinder 3 for damage and contact resistance
- 5If the fault remains, a workshop with diagnostic equipment should check the injector on cylinder 3
Symptomer du kan merke4
- The Check engine lamp lights up or behaves abnormally
- Poor performance and lack of power while driving
- The engine hesitates or surges while driving
- The engine sounds abnormal
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.