Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P021900
    VOLVO

    ECM-P021900 - Engine Overspeed Condition. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Vis modeller per årsmodell og motor (11)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
    • Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo S60 (2011–)2011–2015Kun motor: D4162T
    • Volvo S80 (2007–)2008–2010Kun motor: D4204T
    • Volvo S80 (2007–)2012–2015Kun motor: D4162T
    • Volvo V40 (2013–)2013–2015Kun motor: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
    • Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo V60 (2011–)2011–2015Kun motor: D4162T
    • Volvo V70 (2008–)2008–2010Kun motor: D4204T
    • Volvo V70 (2008–)2012–2015Kun motor: D4162T

    Hva betyr feilkoden?

    The engine control module (ECM) monitors engine speed and has registered that the engine has been run above its permitted speed. The code is general and does not specify a particular type of fault. The cause may be a missed gear change, or engine oil that has entered the intake manifold or the cylinder bores, and contaminated engine oil is also a possible cause.

    Mulige årsaker

    • Missed gear change causing the engine to overspeed
    • Engine oil in the intake manifold or in the cylinder bores
    • Contaminated engine oil

    Hva du kan gjøre

    1. 1Read the code, clear it and road test to see whether it returns
    2. 2Check that the fuses are intact. Fuse locations are shown in the owner's manual
    3. 3Think back to whether you missed a gear when the fault appeared, or whether the shift was stiff
    4. 4Check the engine oil level and condition, and look for oil in the intake hoses
    5. 5If you have a diagnostic tool: follow engine speed in live data at idle and check that it stays steady
    6. 6If the fault remains, have a workshop check the engine with diagnostic equipment

    Symptomer du kan merke3

    • High or unsteady idle
    • Warning symbol and text message in the display
    • The car feels poor to drive, with reduced performance and lack of power

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.