VOLVO
ECM-P022000 - Throttle/Pedal Position Switch B Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (30)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010Kun motor: D4164T
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, D4164T
- Volvo S80 (2007–)2012, 2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013–2014Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010Kun motor: D4164T
- Volvo V70 (2008–)2011Kun motor: B6304T4, B6324S5, D4164T
- Volvo V70 (2008–)2012Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Kun motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC60 (2009–)2011–2014Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Kun motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC70 (2008–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2011–2012Kun motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle motorer unntatt: B5254T9
Hva betyr feilkoden?
Although the code is named switch B circuit, it applies to the signal from the accelerator pedal position sensor. The engine control module (ECM) checks the pedal signals, and the fault is set when the quality of the data received is too poor to be trusted.
Mulige årsaker
- Open circuit in the signal wire
- Open circuit in the ground wire
Hva du kan gjøre
- 1Read the code, clear it and road test to see whether it returns
- 2Check that the fuses are intact. Fuse locations are shown in the owner's manual
- 3Check the accelerator pedal connector and harness for loose connections, corrosion and moisture
- 4Use a multimeter to check that the signal wire and the ground wire to the accelerator pedal have no break
- 5If you have a diagnostic tool: follow the accelerator pedal position in live data while pressing and releasing the pedal, and check that the value follows the movement smoothly
- 6If the fault remains, have a workshop check the accelerator pedal sensor and the central electronic module (CEM) with diagnostic equipment
Symptomer du kan merke4
- Poor response from the accelerator pedal
- The car feels poor to drive, with reduced performance and lack of power
- The car hesitates, surges or runs jerkily
- Warning symbol and text message in the display
Hva feilen kan påvirke2
- Engine output is limited
- If the brake pedal is pressed at the same time, the control module treats the accelerator pedal as released
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.