VOLVO
ECM-P024313 - Turbo/Super Charger Wastegate Solenoid A. General Electrical Failures. Circuit open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) monitors the signal wire to the turbo control valve and sets the code when it detects a break there. It is an electrical fault with an open circuit.
Mulige årsaker
- Open circuit in the signal wire
- Open circuit in the supply wire
- Damaged turbo control valve
Hva du kan gjøre
- 1Read the code, clear it and road test to see whether it returns
- 2If you have a diagnostic tool: activate the turbo control valve and listen from the engine bay for a clear click
- 3Check the fuse for the circuit. Fuse locations are shown in the owner's manual
- 4Look at the turbo control valve connector for contact resistance and oxidation
- 5Use a multimeter to check that the signal wire between the engine control module and the turbo control valve is not broken
- 6If the fault remains, have a workshop check the supply wire from the system relay to the turbo control valve
Symptomer du kan merke1
- The car feels poor to drive, with reduced performance and lack of power
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.