VOLVO
ECM-P024600 - Turbo/Super Charger Wastegate Solenoid A High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The engine control module (ECM) monitors the signal wire to the turbo control valve, and the fault is set when the voltage there is too high. The fault is general and does not show which part of the circuit is the cause.
Mulige årsaker
- Signal wire shorted to voltage
- Damaged turbo control valve
Hva du kan gjøre
- 1Read the code, clear it and road test to see whether it returns
- 2Look at the turbo control valve connector for loose connections and oxidation
- 3Use a multimeter to check that the signal wire to the turbo control valve has no contact with positive
- 4If you have a diagnostic tool: activate the turbo control valve and check that it moves
- 5Check that the fuses are intact. Fuse locations are shown in the owner's manual
- 6If the fault remains, have a workshop check the circuit and the turbo control valve with diagnostic equipment
Symptomer du kan merke2
- The malfunction indicator lamp comes on
- The car performs worse than usual
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.