VOLVO
ECM-P029C00 - Cylinder 1 - Injector Restricted. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module (ECM) monitors how much fuel each injector delivers per cylinder. For cylinder 1, the code is stored when the injected fuel amount has deviated from the expected amount over several injections in a row. The code deals with small fuel quantities and is general.
Mulige årsaker
- Injector sticking or stuck
- Worn injector
Hva du kan gjøre
- 1Read and note the fault code, clear it and test drive to see whether it returns
- 2If you have a diagnostic tool: activate the cylinder 1 injector and see whether it responds
- 3Check the connector to the cylinder 1 injector for contact resistance and oxidation
- 4Have a workshop with diagnostic equipment check the cylinder 1 injector and replace it if it is sticking or worn
Symptomer du kan merke3
- The car lacks power
- The car hesitates, surges or runs jerkily, at any time or all the time
- The Check engine light comes on or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.