Hva betyr feilkode ECM-P030198?

Diagnose og feilkodedefinisjon for ECM-P030198 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P030198 - Cylinder 1 Misfire Detected. Component Failures. Component or system over temperature

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

3 modeller

S60 (2011–), S80 (2007–), V70 (2008–)

Vis modeller per årsmodell og motor (9)

Hva betyr feilkoden?

The fault code is stored when the engine control module (ECM) detects misfires on cylinder 1 that can damage the catalytic converter, during a period after the engine starts. The misfire can make the catalytic converter overheat, and the code shows which cylinder is affected.

Mulige årsaker

Low fuel level
Contaminated or incorrect fuel
Air leak
Clogged or leaking injection valve
Incorrect fuel pressure
Damaged VVT unit

Hva du kan gjøre

1Read the fault codes; any camshaft control codes are traced first
2Check the intake system and the crankcase ventilation for leaks and clogging
3Check that the fuel level and fuel quality are correct, and that the engine oil level is right
4If you have a diagnostic tool: read the ethanol content calculated by the control module in live data and see whether it matches the fuel that has been filled
5Have a workshop with diagnostic equipment check the fuel pressure, the compression and the VVT unit, and adjust the ethanol content if needed

Symptomer du kan merke5

The engine is hard to start and cranks slowly
The engine feels short of power
The engine hesitates, surges or runs roughly when driven
Uneven idle
The Check engine light lights up or behaves abnormally

Hva feilen kan påvirke2

Rear oxygen sensor control is switched off
Lambda control is switched off

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.