Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P030298
    VOLVO

    ECM-P030298 - Cylinder 2 Misfire Detected. Component Failures. Component or system over temperature

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    3 modeller

    S60 (2011–), S80 (2007–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2012Kun motor: B5254T5
    • Volvo S80 (2007–)2007–2008Kun motor: B5254T6
    • Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Kun motor: B5254T10
    • Volvo V70 (2008–)2008Kun motor: B5254T6
    • Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Kun motor: B5254T10

    Hva betyr feilkoden?

    Misfires on cylinder 2 that can damage the catalytic converter are registered by the engine control module (ECM) shortly after the engine starts. It points to cylinder 2 and belongs to the overheating codes, because unburned fuel can make the catalytic converter too hot.

    Mulige årsaker

    • Low fuel level
    • The engine does not reach operating temperature between several cold starts
    • Poor fuel quality, for example summer fuel in winter
    • Clogged or leaking injection valve
    • Uneven compression
    • Incorrectly calculated ethanol content

    Hva du kan gjøre

    1. 1Read the fault codes; codes for camshaft control should be traced first
    2. 2Check that the intake system does not leak and that the crankcase ventilation is clear
    3. 3Check that the fuel level is sufficient and that the fuel suits the season
    4. 4If you have a diagnostic tool: read the misfire counters for each cylinder in live data and see whether cylinder 2 differs
    5. 5Have a workshop with diagnostic equipment check the injection valve and the compression on cylinder 2

    Symptomer du kan merke5

    • The engine is hard to start and cranks slowly
    • Uneven idle
    • The engine lacks power and performs poorly
    • The engine hesitates, surges or runs roughly when driven
    • The Check engine light lights up or behaves abnormally

    Hva feilen kan påvirke2

    • Rear oxygen sensor control is switched off
    • Lambda control is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.