VOLVO
ECM-P032429 - Knock Control System Error. General Signal Failures. Signal signal invalid
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) continuously monitors the function of the knock sensors. If the signal from either knock sensor is faulty, the fault code is stored. The fault may be caused by a knock sensor that is loose or incorrectly fitted, a damaged sensor, or a fault in the engine control module.
Mulige årsaker
- Loose knock sensor
- Incorrectly fitted knock sensor
- Damaged knock sensor
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1Read the fault code, clear it and test drive the car to see whether it returns
- 2Check that the knock sensors are firmly seated and fitted correctly
- 3Check the knock sensor connectors for oxidation and play
- 4If you have a diagnostic tool: read the knock signals from both sensors in live data with the engine running and compare them
- 5If the fault remains, have a workshop replace both knock sensors, since the control module cannot tell which one is faulty; if it still remains, the engine control module may need replacing
Symptomer du kan merke1
- Poor performance and lack of power
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.