VOLVO
ECM-P033122 - Knock Sensor 2 Circuit Range/Performance (Bank 2). General Signal Failures. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (24)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo S80 (2007–)2011–2012, 2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013–2014Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Kun motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2014Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Kun motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The signal from knock sensor 2 is too high compared with limits that depend on engine speed. The fault code is then set. The causes may be poor contact, a loose sensor or a damaged sensor. The fault is a general signal fault.
Mulige årsaker
- Contact resistance or oxidation at the knock sensor plug
- Loosely fitted knock sensor
- Damaged knock sensor
Hva du kan gjøre
- 1Read the fault code, clear it and take a short drive
- 2Check that knock sensor 2 is tightened down and has not worked loose
- 3Check the connection to knock sensor 2 for contact resistance and oxidation
- 4If you have a diagnostic tool: read the knock signal from sensor 2 in live data at idle and under throttle
- 5Have a workshop with diagnostic equipment replace knock sensor 2 if it is damaged
Symptomer du kan merke3
- Poor performance and lack of power, especially when pulling away from standstill
- The engine hesitates, surges or runs roughly during acceleration, slowing down and at constant speed
- Reduced performance
Hva feilen kan påvirke1
- Ignition timing is retarded as a safety measure
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.