VOLVO
ECM-P033502 - Crankshaft Position Sensor A Circuit. General Failure Information. General signal failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The ECM watches the output of the crankshaft sensor. If the signal is missing or wrong, the fault code is set. The fault mainly affects the ability to start. It may be caused by oxidation, a break in the wiring, an incorrectly fitted sensor or a damaged sensor.
Mulige årsaker
- Contact resistance and oxidation in the connections
- Break in the crankshaft sensor wiring
- Incorrectly fitted crankshaft sensor
- Damaged crankshaft sensor
Hva du kan gjøre
- 1Read the fault code, clear it and try starting the engine to see whether it returns
- 2Check the crankshaft sensor connector for oxidation and contact resistance
- 3Check that the crankshaft sensor wiring is not broken; with a multimeter, confirm that it has continuity all the way
- 4Check that the crankshaft sensor is correctly fitted and not loose
- 5Keep cables with high current draw, such as the starter cable, away from the crankshaft sensor wiring, and have a workshop replace the sensor if it is damaged
Symptomer du kan merke2
- The engine is hard to start and cranks slowly
- The Check engine light lights up or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.