Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P033538
    VOLVO

    ECM-P033538 - Crankshaft Position Sensor A Circuit. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. Signal frequency incorrect

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Vis modeller per årsmodell og motor (11)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
    • Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo S60 (2011–)2011–2015Kun motor: D4162T
    • Volvo S80 (2007–)2008–2010Kun motor: D4204T
    • Volvo S80 (2007–)2012–2015Kun motor: D4162T
    • Volvo V40 (2013–)2013–2015Kun motor: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
    • Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo V60 (2011–)2011–2015Kun motor: D4162T
    • Volvo V70 (2008–)2008–2010Kun motor: D4204T
    • Volvo V70 (2008–)2012–2015Kun motor: D4162T

    Hva betyr feilkoden?

    The engine control module (ECM) counts the magnetic poles on the magnet wheel using the crankshaft sensor and checks that the frequency of the signal is correct. If the frequency is wrong, the fault code is set. The cause may be play or oxidised connectors, a damaged magnet wheel or a damaged sensor.

    Mulige årsaker

    • Loose connection
    • Contact resistance or oxidation in the connections
    • Damaged magnet wheel
    • Damaged crankshaft sensor

    Hva du kan gjøre

    1. 1Read the fault code, clear it and test drive the car to see whether it returns
    2. 2Check that the fuses are intact; their locations are shown in the owner's manual or on the fuse box cover
    3. 3Check the connectors at the crankshaft sensor for play, and that they are firmly seated and clean
    4. 4If you have a diagnostic tool: read the speed signal in live data with the engine running and see whether it is uneven or jumps
    5. 5Have a workshop with diagnostic equipment check the magnet wheel and the crankshaft sensor and replace the damaged part if needed

    Symptomer du kan merke2

    • The engine stalls
    • The engine does not start and only cranks

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.