VOLVO
ECM-P034000 - Camshaft Position Sensor A Circuit (Bank 1 or single sensor). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (44)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Alle motorer unntatt: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2007
- Volvo S80 (2007–)2008–2009Alle motorer unntatt: B4204S3, B4204S4, D4204T
- Volvo S80 (2007–)2010Alle motorer unntatt: B4204S3, B4204S4, B4204T6, D4204T
- Volvo S80 (2007–)2011Alle motorer unntatt: B4164T, B4204S3, B4204S4, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2013Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T11, B4204T12, B4204T15, B4204T6, B4204T7, D4204T5
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3
- Volvo V40 (2013–)2014Alle motorer unntatt: B4164T, B4164T3, B4164T4
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9, D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle motorer unntatt: B4164T
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, B4204T11, D4204T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: B6304T4, D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012–2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo V60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Alle motorer unntatt: B4204S3, B4204S4, D4204T
- Volvo V70 (2008–)2010Alle motorer unntatt: B4204S3, B4204S4, B4204T6, D4204T
- Volvo V70 (2008–)2011Alle motorer unntatt: B4164T, B4204S3, B4204S4, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2013Alle motorer unntatt: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T11, B4204T7, D4204T5
- Volvo V70 (2008–)2015Alle motorer unntatt: B4164T, B4164T2, B4204T11, D4204T5
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Alle motorer unntatt: B4204T6
- Volvo XC60 (2009–)2011–2012Alle motorer unntatt: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7
- Volvo XC60 (2009–)2014–2015Alle motorer unntatt: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo XC70 (2008–)2008–2013
- Volvo XC70 (2008–)2014–2015Alle motorer unntatt: B4204T11, D4204T5
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Kun motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle motorer unntatt: B5254T9
Hva betyr feilkoden?
The fault concerns the camshaft position sensor on the intake side, bank 1 (the cylinder bank at the front), or the single sensor if the engine has only one. The engine control module (ECM) monitors the sensor signal, and the fault is stored when the signal is missing or incorrect. The code does not say which type of fault it is.
Mulige årsaker
- Open circuit in the signal wire
- Signal wire short circuit to ground or supply voltage
- Damaged camshaft position sensor
- Contact resistance or oxidation in the connections
- Open circuit in the wires to the camshaft sensor
- Camshaft sensor fitted incorrectly
Hva du kan gjøre
- 1If you have a diagnostic tool, start the engine, raise the engine speed a few times and read the fault status. 'Fault found' means the fault is permanent.
- 2Check that the fuses are intact.
- 3With the ignition off, check that the connector at the camshaft sensor is secure and free from oxidation and contact resistance, and that the sensor is correctly fitted.
- 4Use a multimeter to check that the signal wire and the ground lead to the camshaft sensor have no open circuit and are not shorted to ground or supply voltage.
- 5If you have a diagnostic tool and your equipment shows it, read the camshaft sensor position or speed in live data and check that the value follows the engine.
- 6If the fault returns, have a workshop check the camshaft sensor and its wiring.
Symptomer du kan merke5
- Engine is hard to start or does not start, sometimes or every time
- Engine stalls
- Check engine light is on or behaves abnormally
- Car lacks power, especially when pulling away from standstill
- Car hesitates or jerks while driving, for example during acceleration
Hva feilen kan påvirke2
- The ECM uses the crankshaft sensor signal instead
- Camshaft control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.