VOLVO
ECM-P034068 - Camshaft Position Sensor A Circuit (Bank 1 or single sensor). Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
This is an event controlled code, meaning it shows an event and is intended as information. It does not point to a fault in the control module where it is active. The engine control module sets the code when it interprets the camshaft sensor signal as faulty, and the code disappears when the conditions no longer apply.
Mulige årsaker
- Another fault that this code is a follow-on to
Hva du kan gjøre
- 1Read all the fault codes in the engine control module and see which ones relate to the camshaft sensor. Those are the ones to address first.
- 2Fix the root fault according to the code that was set first, then read the fault codes again with a diagnostic tool.
- 3This code is a consequence of other codes and does not need to be erased separately. It disappears when the conditions no longer apply.
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.