Hva betyr feilkode ECM-P034162?

Diagnose og feilkodedefinisjon for ECM-P034162 (Volvo C30 (2007–2013), Volvo S40 (2004–2013), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P034162 - Camshaft Position Sensor A Circuit Range/Performance (Bank 1 or single sensor). Algorithm Based Failures. Signal compare failure

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

9 modeller

C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

Vis modeller per årsmodell og motor (9)

Hva betyr feilkoden?

The ECM checks the camshaft sensor signal against the crankshaft sensor signal. The fault is stored when the module finds a faulty signal during the comparison. The code applies to the camshaft sensor on bank 1, or to the single sensor if the engine has only one.

Mulige årsaker

Loose connections
Contact resistance or oxidation in the connections
Damaged camshaft sensor
Damaged crankshaft sensor

Hva du kan gjøre

1If you have a diagnostic tool, start the engine and read the fault status. 'No fault found' means the fault is not active right now.
2Check that the fuses are intact.
3With the ignition off, check that the connectors at the camshaft sensor and the crankshaft sensor are secure and free from oxidation.
4Check that the camshaft sensor and the crankshaft sensor are correctly fitted in their positions.
5If your diagnostic tool shows it, compare the camshaft sensor position in live data with the engine speed while the engine runs.
6If the fault returns, have a workshop check the sensors and their wiring.

Symptomer du kan merke1

Engine does not start but cranks

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.