VOLVO
ECM-P034200 - Camshaft Position Sensor A Circuit Low (Bank 1 or single sensor). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
12 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (40)
- Volvo C30 (2007–2013)2011–2013Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Kun motor: D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Kun motor: D5244T10
- Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Kun motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Kun motor: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Kun motor: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Kun motor: D5204T6
- Volvo V50 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: D5204T2, D5244T10
- Volvo V60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Kun motor: D5244T10
- Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Kun motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle motorer unntatt: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Hva betyr feilkoden?
The engine control module (ECM) compares the position of the camshaft with the position of the crankshaft. The fault is stored when the signal is incorrect, and it can lie in how the camshaft is fitted or in the camshaft itself. The code does not say which type of fault it is.
Mulige årsaker
- Camshaft incorrectly fitted, for example after work on the camshaft drive
- Damaged camshaft
Hva du kan gjøre
- 1If you have a diagnostic tool, start the engine and read the fault status. 'Fault found' means the fault is permanent.
- 2Check that the fuses are intact.
- 3If the camshaft drive has recently been worked on, have a workshop check that the camshaft is correctly fitted in relation to the crankshaft.
- 4If your diagnostic tool shows it, read the camshaft sensor position or speed in live data when the engine starts.
- 5If the fault returns, have a workshop check the camshaft and the camshaft sensor.
Symptomer du kan merke2
- Engine does not start, sometimes or every time
- Automatic engine start/stop does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.