Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P034300
    VOLVO

    ECM-P034300 - Camshaft Position Sensor A Circuit High (Bank 1 or single sensor). General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    12 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (40)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D5204T, D5204T5
    • Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
    • Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
    • Volvo S40 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
    • Volvo S60 (2011–)2011Kun motor: D5204T2, D5244T10
    • Volvo S60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo S60 (2011–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
    • Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
    • Volvo S80 (2007–)2009Kun motor: D5244T10
    • Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
    • Volvo S80 (2007–)2011Kun motor: D5204T2, D5244T10
    • Volvo S80 (2007–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
    • Volvo S80 (2007–)2015Kun motor: D5204T3, D5244T15
    • Volvo V40 (2013–)2013–2014Kun motor: D5204T4, D5204T6
    • Volvo V40 (2013–)2015Kun motor: D5204T6
    • Volvo V40 Cross Country (2013–)2013–2014Kun motor: D5204T4, D5204T6
    • Volvo V40 Cross Country (2013–)2015Kun motor: D5204T6
    • Volvo V50 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
    • Volvo V60 (2011–)2011Kun motor: D5204T2, D5244T10
    • Volvo V60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo V60 (2011–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
    • Volvo V60 (2011–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
    • Volvo V60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
    • Volvo V70 (2008–)2009Kun motor: D5244T10
    • Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
    • Volvo V70 (2008–)2011Kun motor: D5204T2, D5244T10
    • Volvo V70 (2008–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo V70 (2008–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
    • Volvo V70 (2008–)2014–2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
    • Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
    • Volvo XC60 (2009–)2011Kun motor: D5204T2, D5244T10, D5244T16
    • Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
    • Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
    • Volvo XC60 (2009–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
    • Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
    • Volvo XC70 (2008–)2011Kun motor: D5204T2, D5244T10, D5244T16
    • Volvo XC70 (2008–)2012–2013Alle motorer unntatt: B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2014–2015Kun motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17

    Hva betyr feilkoden?

    The engine control module (ECM) compares the camshaft position with the crankshaft and has found that the camshaft signal does not match. On these engines the code mainly points to a mechanical fault, such as an incorrectly fitted or damaged camshaft, rather than an electrical fault.

    Mulige årsaker

    • Camshaft incorrectly fitted, for example after a timing belt or chain replacement
    • Damaged camshaft

    Hva du kan gjøre

    1. 1Find out whether the timing belt, chain or camshaft has recently been replaced or adjusted
    2. 2Check the engine management fuses
    3. 3Have a workshop check the valve timing and the camshaft position against the crankshaft
    4. 4Do not keep cranking if the engine will not start – incorrect valve timing can damage the engine

    Symptomer du kan merke2

    • The engine does not start, sometimes or always
    • Automatic engine stop/start does not work

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.