VOLVO
ECM-P036668 - Camshaft Position Sensor B Circuit Range/Performance (Bank 1). Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
This is an event controlled code, which is information rather than a fault in the control module where it is active. The ECM sets the code when it interprets the signal from the exhaust camshaft sensor on bank 1 as faulty, and the code disappears when the conditions no longer apply.
Mulige årsaker
- Another fault that this code is a follow-on to
Hva du kan gjøre
- 1Read the fault codes in the engine control module with a diagnostic tool and start with the one that concerns the root fault on the camshaft sensor.
- 2Fix the root fault first, then read the fault codes again, since this code may then disappear.
- 3The code does not need to be erased separately. It disappears by itself when the conditions no longer apply.
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.