VOLVO
ECM-P038113 - Glow Plug/Heater Indicator Circuit. General Electrical Failures. Circuit open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM sets this code when the signal for the glow plug lamp is interrupted. The fault concerns an open circuit, and although the code is named as a heater indicator circuit fault, it applies to the lamp in the instrument cluster (DIM).
Mulige årsaker
- Fault in the CAN network
- Fault in the instrument cluster (DIM)
Hva du kan gjøre
- 1If you have a diagnostic tool, switch on the ignition and read the fault status. 'No fault found' means the fault is not active right now.
- 2Check that the fuses are intact.
- 3Switch on the ignition and look at the glow plug lamp in the instrument panel to see whether it lights and goes out normally.
- 4Read ECM-P038111, ECM-P038112 and ECM-P038119 with the diagnostic tool as well, since they may be related to this code.
- 5Check that the connectors in the CAN network are secure and not loose.
- 6If the fault returns, have a workshop trace the fault in the instrument cluster (DIM) and the CAN network.
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The glow plug lamp is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.