VOLVO
ECM-P038400 - Glow Plug Control Module 1 Control Circuit High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
11 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (17)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2013Kun motor: D4162T
- Volvo S60 (2011–)2014–2015Kun motor: D4162T, D4204T5
- Volvo S80 (2007–)2012–2013Kun motor: D4162T
- Volvo S80 (2007–)2014–2015Kun motor: D4162T, D4204T5
- Volvo V40 (2013–)2013–2014Kun motor: D4162T
- Volvo V40 (2013–)2015Kun motor: D4162T, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2015Kun motor: D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2013Kun motor: D4162T
- Volvo V60 (2011–)2014–2015Kun motor: D4162T, D4204T5
- Volvo V70 (2008–)2012–2013Kun motor: D4162T
- Volvo V70 (2008–)2014–2015Kun motor: D4162T, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The ECM powers the glow plugs through the GCU and its built-in relay. The fault is set when a signal that is too high in the control circuit. It can be caused by the signal cable touching the supply voltage, or by a fault in the power supply or charging system.
Mulige årsaker
- Signal cable short-circuited to supply voltage
- Glow plug power supply cable short-circuited to supply voltage
- Damaged glow plug relay
- Damaged power supply or charging system
- This code may be a follow-on fault from ECM-P056300 and ECM-P056100
Hva du kan gjøre
- 1Check that the fuses are intact; their locations are in the instruction manual or the fuse chart
- 2Read and clear the fault code, then cold-start the engine and see whether it comes back
- 3If the codes ECM-P056300 or ECM-P056100 are present, deal with them first, since this code may be a follow-on fault from them
- 4Check that the battery is charged and that the charging works, since the power supply is among the possible causes
- 5Measure with a multimeter whether the signal cable to the glow plug control module has voltage with the ignition off, which would point to a short to the supply
- 6If you have a diagnostic tool, activate the glow function and check that the glow relay engages
Symptomer du kan merke2
- Engine is hard to start or cranks slowly on cold starts
- Starting problems at all times, or it is unclear when they occur
Hva feilen kan påvirke1
- The glow plugs are deactivated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.