VOLVO
ECM-P03A000 - Cylinder 2 Fuel Pressure Sensor Circuit Range/Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module (ECM) compares the fuel pressure measured by the pressure sensors in the injectors. The fault is set when the pressure sensor in the injector for cylinder 2 differs from the readings of the other three sensors. The sensor in that cylinder is therefore the one causing the difference.
Mulige årsaker
- Pressure sensor in the injector for cylinder 2 is faulty
Hva du kan gjøre
- 1If you have a diagnostic tool, compare the reading from the sensor for cylinder 2 with the other three with the engine at idle
- 2Check that the connector at the injector for cylinder 2 is firmly seated and free from oxidation
- 3Measure with a multimeter that the wire to the injector for cylinder 2 has no open circuit and no contact with ground (the body)
- 4Clear the fault code and road test the car to see whether it comes back
- 5If the fault remains, have a workshop check the pressure sensor in the injector for cylinder 2
Symptomer du kan merke1
- The Check engine (malfunction indicator) light comes on or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.