VOLVO
ECM-P042500 - Catalyst Temperature Sensor Circuit (Bank 1, Sensor Circuit 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
Although the code is named for the catalytic converter temperature sensor, the condition concerns the temperature sensor for the particle trap. The ECM sets the code when that sensor's signal is out of range: too high, too low, faulty or unreasonable. Testing happens with the engine running.
Mulige årsaker
- Loose plugs, or poor contact with resistance or oxidation at the terminals
- Damaged particle trap temperature sensor
Hva du kan gjøre
- 1Check that the connectors to the particle trap temperature sensor are firmly seated and not oxidised
- 2Use a multimeter to check that the wires to the sensor have no break
- 3If you have a diagnostic tool, read the sensor's value with the engine running and see whether it seems reasonable
- 4Read and clear the fault code, then road test the car to see whether it comes back
- 5If the fault remains, have a workshop check the particle trap temperature sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke2
- An estimated temperature is used instead
- If the sensor is damaged, an unreasonable temperature may be displayed
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.