VOLVO
ECM-P042700 - Particulate Filter Temperature Sensor Circuit Low (Bank 1, Sensor Circuit 2). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (46)
- Volvo C30 (2007–2013)2011–2013Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Kun motor: D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007–2008Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2009Kun motor: D5244T10, D5244T4, D5244T5
- Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Kun motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Kun motor: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Kun motor: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Kun motor: D5204T6
- Volvo V50 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: D5204T2, D5244T10
- Volvo V60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V60 (2011–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo V70 (2008–)2008Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2009Kun motor: D5244T10, D5244T4, D5244T5
- Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Kun motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle motorer unntatt: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The fault concerns the temperature sensor before the particle filter on bank 1 and is set when the signal from it is incorrect. The code is named for a low signal, and the car then uses a calculated temperature instead of the sensor reading.
Mulige årsaker
- Fault codes ECM-P042700 and ECM-P042800 may share the same cause and should be read together
- Signal cable short-circuited to supply voltage
- Signal cable short-circuited to ground
- Open circuit in the signal cable
- Contact resistance or oxidation in the connections
- Damaged particle filter temperature sensor
Hva du kan gjøre
- 1Start the engine and read the fault status with a diagnostic tool, if you have one
- 2Check that the connectors to the temperature sensor before the particle filter are firmly seated and not oxidised
- 3Use a multimeter to check that the signal cable has no break and is not short-circuited to ground or supply voltage
- 4Read and clear the fault code, then road test the car to see whether it comes back
- 5If the fault remains, have a workshop check the temperature sensor before the particle filter
Symptomer du kan merke2
- The car lacks power
- The Check engine (malfunction indicator) light comes on or behaves abnormally
Hva feilen kan påvirke2
- A calculated temperature is used instead
- The car goes into limp-home mode
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.