VOLVO
ECM-P044413 - Evaporative Emission System Purge Control Valve "A" Circuit Open. General Electrical Failures. Circuit open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The fault concerns an open circuit to EVAP valve A. The ECM sets the code when it receives no signal from the valve.
Mulige årsaker
- Open circuit in the signal cable
- Damaged EVAP valve
- Contact resistance in the connections
- Open circuit in the power cable
Hva du kan gjøre
- 1Check the fuse for the circuit to the EVAP valve
- 2Check that the connector at the EVAP valve is clean and firmly seated
- 3Use a multimeter to check the signal wire from the control module to the EVAP valve for an open circuit
- 4Use a multimeter to check that the supply wire from the system relay to the EVAP valve has no break
- 5Have a workshop measure the resistance of the EVAP valve and judge whether the valve is damaged
Symptomer du kan merke1
- The Check engine (malfunction indicator) light comes on or behaves abnormally
Hva feilen kan påvirke1
- Control with two oxygen sensors is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.