VOLVO
ECM-P045900 - Evaporative Emission System Purge Control Valve Circuit High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (41)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Kun motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Kun motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Kun motor: B4204T11, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle motorer unntatt: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module (ECM) has registered a fault in the EVAP system, the valve that controls fuel vapour from the fuel tank to the engine. The code is general and does not specify what kind of fault it is.
Mulige årsaker
- Poor contact or corrosion in the connectors
- The signal wire is short-circuited to supply voltage
- Damaged EVAP valve
Hva du kan gjøre
- 1Read out and note the code, clear it and road test to see whether it returns
- 2Check that the fuses are intact. Their locations are given in the owner's manual or on the fuse box cover
- 3Check that the connector at the EVAP valve is fully seated and free from oxidation, and remedy a loose or corroded connection
- 4Look for chafing or pinch damage on the wire to the engine control module, and use a multimeter to check for contact with supply voltage
- 5With a diagnostic tool, activate the EVAP valve and listen or feel for vibration. No vibration suggests a permanent fault; vibration means it is not active now
- 6Replace a damaged EVAP valve, clear the code and road test. If the fault remains, have a workshop with diagnostic equipment check the valve and wiring
Symptomer du kan merke2
- Malfunction indicator lamp (MIL) lights up
- Fuel odour
Hva feilen kan påvirke1
- Fuel trim, the automatic adjustment of the fuel mixture, is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.