VOLVO
ECM-P046068 - Fuel Level Sensor A Circuit. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
This is an event-driven information code. The ECM has found a faulty fuel level sensor, but the code does not indicate a fault in the ECM itself. It is a secondary fault linked to other codes and disappears when the conditions no longer apply, so it does not need to be cleared separately.
Mulige årsaker
- Fault registered in the central electronic module (CEM)
- Damaged fuel level sensor
Hva du kan gjøre
- 1Remedy the fault codes in the central electronic module (CEM) first, since this code is a secondary fault
- 2Do not clear the code separately. It disappears when the conditions no longer apply
- 3Road test the vehicle after the repair and check whether the code has gone
- 4If you have a diagnostic tool, read the fuel level via the CEM and check whether the signal is reasonable
- 5If the code remains after the CEM fault codes are remedied, have a workshop check the fuel level sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.