VOLVO
ECM-P046108 - Fuel Level Sensor A Circuit Range/Performance. General Failure Information. Bus Signal / Message Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) has registered that the signal from the fuel level sensor is faulty. The general code concerns a bus or message failure, and most of the diagnosis for the sensor is carried out in the central electronic module (CEM).
Mulige årsaker
- Fault registered in the central electronic module (CEM)
- Damaged fuel level sensor
Hva du kan gjøre
- 1Read off the fault codes in the central electronic module (CEM) first and troubleshoot according to them
- 2Check the connections and wiring to the fuel level sensor first
- 3Use a multimeter to check that the wires to the fuel level sensor are not open-circuited or short-circuited to ground
- 4If no fault is found in the wiring or connectors, the fuel level sensor is the suspected cause. Have a workshop replace it
- 5Clear the fault code only after the fault has been remedied, and road test
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.