VOLVO
ECM-P048013 - Fan 1 Control Circuit. General Electrical Failures. Circuit open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (26)
- Volvo C30 (2007–2013)2011–2013Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo S60 (2011–)2011–2012Alle motorer unntatt: B5254T5, D4162T
- Volvo S60 (2011–)2013–2015Alle motorer unntatt: D4162T
- Volvo S80 (2007–)2009Kun motor: D5244T10
- Volvo S80 (2007–)2010Kun motor: B4204T6, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Alle motorer unntatt: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, B8444S, D4164T
- Volvo S80 (2007–)2012Alle motorer unntatt: B5254T10, D4162T
- Volvo S80 (2007–)2013–2015Alle motorer unntatt: D4162T
- Volvo V40 (2013–)2013–2015Alle motorer unntatt: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Alle motorer unntatt: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo V60 (2011–)2011–2015Alle motorer unntatt: D4162T
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2009Kun motor: D5244T10
- Volvo V70 (2008–)2010Kun motor: B4204T6, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Alle motorer unntatt: B4204S3, B4204S4, B5254T10, B5254T11, D4164T
- Volvo V70 (2008–)2012Alle motorer unntatt: B5254T10, D4162T
- Volvo V70 (2008–)2013–2015Alle motorer unntatt: D4162T
- Volvo XC60 (2009–)2010Alle motorer unntatt: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2015
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011–2015
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The code indicates that the message from the electric fan control module to the engine control module (ECM) is missing or incorrect, so the ECM cannot control the fan. It is an electrical fault with an open circuit, and
Mulige årsaker
- Open circuit in the signal wire between the ECM and the fan control module
- Loose contact, contact resistance or oxidation in wires and connections
- Damaged engine control module (ECM)
- Damaged electric fan control module
Hva du kan gjøre
- 1Start by checking the fuses for the electric fan and their locations in the owner's manual
- 2Look for broken or loose connectors on the signal wire between the engine control module and the fan control module
- 3Use a multimeter to check that the signal wire is continuous at both ends, meaning it has no open circuit
- 4Check the connector terminals in the wire for contact resistance and oxidation, and remedy as needed
- 5If you have a diagnostic tool, read the fault code's status, and after repair check that the fault status shows no fault once the diagnosis is complete
- 6If the wires are sound but the fault remains, a workshop needs to examine both control modules
Symptomer du kan merke2
- The engine may overheat
- Temperature control and air conditioning functions do not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.