VOLVO
ECM-P049000 - Exhaust Gas Recirculation Control Circuit High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S80 (2007–)2007Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2008–2009Kun motor: D4204T, D5244T4, D5244T5
- Volvo S80 (2007–)2010Kun motor: D4164T, D4204T
- Volvo S80 (2007–)2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D4204T, D5244T4, D5244T5
- Volvo V70 (2008–)2010Kun motor: D4164T, D4204T
- Volvo V70 (2008–)2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The code concerns the EGR valve control circuit, where the signal is too high. The engine control module (ECM) monitors both the function of the valve and the signal from its internal power stage, and the code does not specify what kind of fault it is.
Mulige årsaker
- The signal wire is short-circuited to supply voltage
- Damaged position sensor or damaged EGR valve
- Loose contact, contact resistance or oxidation in the connections
- The EGR valve sticks, for example because of dirt or soot
- Break in the supply or ground wire
- The supply wire is short-circuited to supply voltage
Hva du kan gjøre
- 1Check the fuses for the EGR system. Their location is given in the owner's manual
- 2Look for chafing or pinch damage on the signal wire, and check that the connectors are secure
- 3Use a multimeter to check that the signal wire and the supply wire have no contact with supply voltage
- 4Clean the EGR valve if it is sooty, and check that it does not bind
- 5If you have a diagnostic tool, read the position sensor value with the engine running and see whether it is unreasonable
- 6Replace a damaged EGR valve and have a workshop adapt it. Clear the code and road test
Symptomer du kan merke2
- The check engine lamp comes on or behaves abnormally
- A text message appears on the display
Hva feilen kan påvirke1
- EGR control is lost
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.