VOLVO
ECM-P050068 - Vehicle Speed Sensor A. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
This is an event-driven information code, and it does not indicate a fault in the engine control module. The ECM sets the code when the brake module speed signal (BCM) is too high. The cause may lie in the brake control module, and the code disappears when the conditions no longer apply.
Mulige årsaker
- The cause may lie in the brake control module (BCM)
Hva du kan gjøre
- 1Read the fault codes in the brake control module (BCM) with a diagnostic tool, and remedy them first
- 2Do not clear the code separately. It disappears when the conditions no longer apply
- 3If you have a diagnostic tool, read the vehicle speed as live data while driving and see whether it appears reasonable
- 4The brake system is safety-critical. If the speed signal continues to be wrong, have a workshop check the brake control module, and do not work on the brakes yourself
- 5Road test after the repair and check that the code does not return
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.