Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P050C00
    VOLVO

    ECM-P050C00 - Cold Start Engine Coolant Temperature Performance. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
    • Volvo V40 (2013–)2015Kun motor: B4204T11
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
    • Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11

    Hva betyr feilkoden?

    During engine warm-up the ECM compares how the temperature rises with the increase it expects, calculated from factors such as load and starting temperature. The code is set when the engine temperature reading is too far from the calculated value. The fault may lie in the sensor, its wiring or the thermostat.

    Mulige årsaker

    • Contact resistance or oxidation in the wiring and connectors to the engine temperature sensor
    • Signal wire in contact with ground
    • Signal wire in contact with supply voltage
    • Damaged thermostat
    • Damaged coolant temperature sensor

    Hva du kan gjøre

    1. 1Read the codes in the engine control module and note whether any other fault codes are present
    2. 2Check the connector and wiring to the coolant temperature sensor for oxidation, loose contacts and chafing
    3. 3If you have a diagnostic tool, follow the coolant temperature in live data while the engine warms up and check that it rises smoothly
    4. 4Check that the fuses are intact
    5. 5Use a multimeter to check that the signal wire to the temperature sensor has no contact with ground or supply voltage
    6. 6If the fault returns, have a workshop with diagnostic equipment check the sensor and the thermostat

    Symptomer du kan merke1

    • The check engine lamp lights or behaves abnormally

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.