Hva betyr feilkode ECM-P051216?

Diagnose og feilkodedefinisjon for ECM-P051216 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P051216 - Starter Request Circuit. General Electrical Failures. Circuit voltage below threshold

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

7 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (20)

Hva betyr feilkoden?

When the engine is started, the ECM sends a signal to the starter relay that controls the starter motor. The code is set when the module finds that the signal is faulty and that the voltage in the circuit is too low. The fault may be a signal wire shorted to ground or with a break, poor connections, or an internal fault in the module.

Mulige årsaker

Signal wire shorted to ground
Contact resistance, oxidation or break in connections
Break in the signal wire
Internal fault in the ECM

Hva du kan gjøre

1Check that the fuses are intact
2Check the signal wire from the engine control module to the starter relay for breaks, chafing and loose connections
3Use a multimeter to check that the signal wire has no contact with ground and no break
4If you have a diagnostic tool, read the relevant start signals in live data during starting attempts and see whether they follow the attempt
5Clear the code and try to start the engine to see whether the code returns
6If the code returns, have a workshop with diagnostic equipment check the engine control module, as an internal fault may be the cause

Symptomer du kan merke1

The engine does not start, either sometimes or always

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.