Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P052124
    VOLVO

    ECM-P052124 - Engine Oil Pressure Sensor/Switch "A" Circuit Range/Performance. General Signal Failures. Signal stuck high

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
    • Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
    • Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5

    Hva betyr feilkoden?

    The ECM monitors the oil pressure with a combined oil pressure and oil temperature sensor. The oil pressure is compared with the ambient and boost pressures already when the ignition is switched on. The code is set when the engine is running and the difference is too large. The signal stays constantly high, and the fault lies in the sensor.

    Mulige årsaker

    • Oil pressure and oil temperature sensor is damaged

    Hva du kan gjøre

    1. 1Check the connector to the oil pressure and oil temperature sensor for oxidation and loose contacts
    2. 2If you have a diagnostic tool, read the oil pressure in live data with the engine running and see whether the value stays at a constant high level
    3. 3Check the sensor wire for a short to supply voltage
    4. 4If the connector and wire are in order but the value stays high, the sensor is probably damaged and needs replacing
    5. 5Clear the code and start the engine to see whether it returns
    6. 6If the fault returns, have a workshop with diagnostic equipment check the sensor and its signal

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.