Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P052200
    VOLVO

    ECM-P052200 - Engine Oil Pressure Sensor/Switch "A" Circuit Low. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
    • Volvo V40 (2013–)2015Kun motor: B4204T11
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
    • Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11

    Hva betyr feilkoden?

    The ECM monitors the oil pressure with the combined oil pressure and oil temperature sensor and constantly checks that the value stays within a fixed range. The code is set when the oil pressure falls outside the range while the engine is running. The fault may be poor contact, a signal wire shorted to ground, or a damaged sensor.

    Mulige årsaker

    • Contact resistance or oxidation in connections
    • Signal wire shorted to ground
    • Oil pressure and oil temperature sensor is damaged

    Hva du kan gjøre

    1. 1Check the sensor connector for contact resistance and oxidation
    2. 2Use a multimeter to check that the sensor signal wire is not shorted to ground
    3. 3If you have a diagnostic tool, read the oil pressure in live data with the engine running and see whether it is outside the range all the time or only sometimes
    4. 4If the connector and wire are in order, the sensor is probably damaged and needs replacing
    5. 5Clear the code and start the engine to see whether it returns
    6. 6If the fault returns, have a workshop with diagnostic equipment check the sensor and its signal

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.