VOLVO
ECM-P052548 - Cruise Control Servo Control Circuit Range/Performance. System Internal Failures. Supervision software failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo S60 (2011–)2011–2014Kun motor: B6304T4
- Volvo S60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B8444S
- Volvo S80 (2007–)2012–2015Kun motor: B6304T4, B6324S4
- Volvo V60 (2011–)2011–2014Kun motor: B6304T4
- Volvo V60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S2
- Volvo V70 (2008–)2011–2015Kun motor: B6304T4
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S2
- Volvo XC60 (2009–)2011–2015Kun motor: B6304T4, B6324S4
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6304T4, B6324S4
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The ECM has registered an internal fault while cruise control is active, and the fault lies in the engine control module itself. Cruise control is switched off for as long as the fault is active. After the engine control module has been reprogrammed or the battery has been replaced, the brake pedal must be pressed twice in quick succession before cruise control can be activated.
Mulige årsaker
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1Clear the code and start the car to see whether it returns
- 2If cruise control cannot be activated after the battery has been disconnected: press the brake pedal twice in quick succession
- 3If you have a diagnostic tool, read the status of the code in the engine control module with the ignition on and see whether the fault is still active
- 4Road test with cruise control and see whether it engages and holds speed
- 5If the code returns, have a workshop with diagnostic equipment check the engine control module, as it may need replacing
Symptomer du kan merke2
- Cruise control does not work at all
- Cruise control does not engage
Hva feilen kan påvirke1
- Cruise control is switched off for as long as the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.