VOLVO
ECM-P052A00 - Cold Start Camshaft Position Timing Over-Advanced (Bank 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (41)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Kun motor: B6324S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Kun motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Kun motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Kun motor: B4204T11, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle motorer unntatt: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2007Kun motor: B6324S
- Volvo XC90 (2003–)2008–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Kun motor: B6324S5
Hva betyr feilkoden?
During catalyst warm-up after a cold start the ECM controls the camshaft position, which is adjusted by the VVT unit. The code is set when the camshaft angle on bank 1 is more advanced than requested. Poor engine oil, low oil pressure, or a fault in the camshaft control valve or the VVT unit may be behind it.
Mulige årsaker
- Poor engine oil quality
- Low oil pressure
- Damaged camshaft control valve
- Damaged VVT unit
Hva du kan gjøre
- 1If a fault code for the correlation between crankshaft and camshaft position is stored, diagnose it first
- 2Check that the engine oil is clean, of the right quality, and that the oil level is correct
- 3If you have a diagnostic tool, read the actual and requested camshaft position in live data during warm-up and check that they follow each other
- 4If the oil is contaminated, have a workshop change the oil and check whether the VVT unit has been damaged
- 5Clear the code and road test the car with the engine cold to see whether it returns
- 6If the code returns, have a workshop with diagnostic equipment check the camshaft control valve and the VVT unit
Symptomer du kan merke5
- Uneven idle
- Reduced performance
- The engine misfires
- The car feels weak or lacks power, especially when setting off from standstill
- The car hesitates or surges, or runs unevenly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.