VOLVO
ECM-P053317 - A/C Refrigerant Pressure Sensor A Circuit High. General Electrical Failures. Circuit voltage above threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The ECM tests the A/C pressure sensor electrically. The code is set when the module finds that the voltage in the circuit is too high. The cause may be a signal wire shorted to supply voltage, a damaged connector or wire, or a damaged sensor.
Mulige årsaker
- Signal wire shorted to supply voltage
- Connector or wire damaged
- Damaged A/C pressure sensor
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Check that the A/C pressure sensor connector is secure and undamaged
- 3Use a multimeter to check that the signal wire to the sensor is not shorted to supply voltage
- 4Where possible, check the functions with the buttons and controls: A/C, heating and fan, and see whether the temperature becomes even
- 5Clear the code and see whether it returns after a drive
- 6If the fault returns, have a workshop with diagnostic equipment check the sensor and its wiring
Symptomer du kan merke3
- The air conditioning does not work
- Uneven cabin temperature
- The heating does not work properly
Hva feilen kan påvirke1
- A constant value is used for the pressure
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.