VOLVO
ECM-P054A00 - Cold Start Exhaust (B) Camshaft Position Timing Over-Advanced (Bank 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S80 (2007–)2008–2011Kun motor: B8444S
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14
- Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14
- Volvo S80 (2007–)2015Kun motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2013Kun motor: B5204T9
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, B5204T9
- Volvo XC60 (2009–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC60 (2009–)2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B5254T14
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC90 (2003–)2008–2011Kun motor: B8444S
Hva betyr feilkoden?
This code concerns exhaust camshaft (B) on bank 1 and is set when its angle during warm-up after a cold start is further forward than the requested position. Camshaft control is switched off while the fault is present. Poor oil quality, low oil pressure, or a fault in the control valve or the VVT unit may be behind it.
Mulige årsaker
- Poor engine oil quality
- Low oil pressure
- Damaged control valve for the exhaust camshaft
- Sticking control valve
- Mechanical fault in the VVT unit
Hva du kan gjøre
- 1Check that the engine oil is clean and of the right quality
- 2Have a workshop check the oil pressure
- 3If you have a diagnostic tool, read the actual and requested exhaust camshaft position in live data during warm-up and see whether they agree
- 4Clear the code and road test the car with the engine cold to see whether it returns
- 5If the code returns, have a workshop with diagnostic equipment check the control valve for the exhaust camshaft and the VVT unit
Symptomer du kan merke5
- Uneven idle
- The engine misfires
- The check engine lamp lights or behaves abnormally
- Hard to start, with the engine cranking slowly
- The car hesitates or surges, or runs unevenly
Hva feilen kan påvirke1
- Camshaft control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.