VOLVO
ECM-P054B00 - Cold Start Exhaust (B) Camshaft Position Timing Over-Retarded (Bank 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S80 (2007–)2008–2011Kun motor: B8444S
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14
- Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14
- Volvo S80 (2007–)2015Kun motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2013Kun motor: B5204T9
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, B5204T9
- Volvo XC60 (2009–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC60 (2009–)2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B5254T14
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC90 (2003–)2008–2011Kun motor: B8444S
Hva betyr feilkoden?
This code concerns exhaust camshaft (B) on bank 1. It is set when the camshaft angle during warm-up after a cold start sits further back than the requested position. The cause may be the oil quality, the oil pressure, or a fault in the control valve or the VVT unit.
Mulige årsaker
- Poor engine oil quality
- Low oil pressure
- Damaged control valve for the exhaust camshaft
- Damaged VVT unit
- Mechanical fault in the VVT unit
Hva du kan gjøre
- 1Check that the engine oil is clean, of the right quality and free from contamination
- 2Have a workshop check the oil pressure, as low oil pressure can affect the camshaft position
- 3If you have a diagnostic tool, read the exhaust camshaft position in live data during warm-up and see whether it follows the requested position
- 4Clear the code and road test the car with the engine cold to see whether it returns
- 5If the code returns, have a workshop with diagnostic equipment check the control valve and the VVT unit
Symptomer du kan merke4
- Uneven idle
- Reduced performance
- The eco lamp is on
- The check engine lamp lights or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.